Click-Image

Description

Product #

Price

 JCS Red Hot Power Tube™ fits A5 or X7
R/T-Cyclone Hole: Yes  FVA: Yes
works with ALL A5 or X7 Markers**
drop-in replacement of stock power tube
The Red Hot Power Tube accessory from JCS is a red anodized aluminum power tube. Direct replacement for the stock plastic power tube in the A5 or X7. The JCS tube is precision machined aircraft aluminum, then red anodized. Our tight fitting front velocity screw design keeps your front velocity set no matter how hard you play! Use with stock valve and internals. Includes one power tube and one Hexadecagon front bolt. **Note: Our most popular tube - updated ! Keeping up with latest revisions from original equipment manufacturers. This tube is backwards compatible with all A5's and X7's.

75155

Jet Click™ shaft & ratchet
Hi-Performance upgrade
 for Cyclone Feeders
works with 98, A5, X7 Cyclones
Stop rubbing plastic on plastic... Get the JCS Jet Click shaft & ratchet kit! Features a custom curved ratchet design that minimizes the force to index the cyclone feeder. Brass wear bushings take the abuse of moving parts and not the plastic. Includes shaft, ratchet, stainless hardware, two precision machined brass bushings, one year warranty. instructions

69322
Kit

69319
replacement bushings

JCS A-5 RVA Upgrade
Adjusts Rear Bolt Spring
Optimize your air usage and increase your marker performance with this RVA by JCS >>> This JCS RVA for A-5's is set apart from the rest because it has two mounting holes for JCS Folding Stock Upgrades... see our accessories page. Includes a #117 o-ring. The #117 size o-ring is placed in between the RVA and Rear Bolt. The #117 o-ring dampens the impact of the rear bolt on the RVA.

66148

JCS Gold P/T Special for A5 or X7 no FVA
R/T-Cyclone Hole: Yes  FVA: No
aka "Goldmember" for A5 or X7 Markers
This tube is for users with custom applications.
Not intended for new users. For users with custom marker setups. The GOLD P/T Special NO FVA. Constructed like #75155, but gold anodized. It DOES NOT HAVE a front velocity adjuster. If your marker is setup with the front velocity adjuster (F.V.A.) full open, this product is for you.  THIS ITEM SHOULD NOT BE USED WITHOUT A VELOCITY CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66148 and a regulator. Therefore, JCS does not recommend this item for new players. Instead, buy item 75155, which has velocity control.
This product is a specialty item and does not work with all gun setups.

75166

designed for custom applications
 special order
ships on time

JCS Power Tube™ no R/T hole, with FVA - SILVER
R/T-Cyclone Hole: No  FVA: Yes
for A5 or X7 Markers
This tube is for users with custom applications.
THIS WILL NOT WORK ON ALL A5's or X7's. This is the same as our original red hot #75155, but DOES NOT HAVE the R/T - cyclone feed air hole. Especially built for A5 or X7 users who bypass the stock cyclone feed system. (Usually players who mod their gun to use the Q-Loader system.)
This product is a specialty item and does not work with all gun setups.

75156

 discontinued

JCS SILVER eTube™ no FVA no R/T hole
R/T-Cyclone Hole: No  FVA: No
for A5 or X7 Markers
This tube is for users with custom applications.
THIS WILL NOT WORK ON ALL A5's or X7's. This is the same as our original gold #75166, but does not have the R/T hole. Especially built for A-5 users with low-pressure setups that bypass the stock cyclone feed system. THIS ITEM SHOULD NOT BE USED WITHOUT A VELOCITY CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66148 and a regulator. Therefore, JCS does not recommend this item for new players. Instead, buy item 75155, which has velocity control.
This product is a specialty item and does not work with all gun setups.

75167

discontinued

on marker

JCS Bi-Pod
fits any barrel 7/8" dia to 1" dia
Black Anodized. Clamps securely to any barrel that is 7/8" diameter up to 1inch diameter. Leg are adjustable from about 6" to 9-1/2". Only weighs 200g (or 0.44 pound). Tools required for assembly are a 5/32 allen wrench and a 3/8 socket.
United States Patented

73355

$49.95

JCS Rails that clamp to ANY 3/8 dovetai

JCS Rails that clamp to 7/8 MIL-STD

JCS Rail Kits

GO TO SIGHT RAIL Mounts: Accessories

more images:
insert, inserts

This RVA stock is now available with the option of the new "771 Series" hinge invented by Blackpoint. The 771 series hinge allows locking the stock at an angle in the open position. Interchangeable angle blocks 0, 10, 12, 14, 16, 18, and 20 degrees are included. 

77162

xShort^TM  Barrel
for the Tippmann A - 5
Available Black Anodized (or Non-Anodized by special request) 5-1/2 inch long. Micro Honed to .687 to .691 diameter. We get e-mail all the time telling us how accurate and happy they are with this barrel.  --> SHOOTS ALL PAINT  + JCS 1 year warranty

67806

Fit-Grip^TM
for the Tippmann A - 5
Available Black Anodized standard
Made to fit all hand sizes. + JCS 1 year warranty

71090

JCS paintball products by Blackpoint !