Miscellaneous

JCS Upper Stock Angle Block Kit
fits upper position JCS stocks
The JCS Stock Angle Kit allows you to modify your existing JCS folding stock at 0, 6, 8, and 10 degree angles. Improves mask clearance and makes sighting easier. Even if you don't use the sights, this kit brings the marker up higher allowing better sighting. Includes stainless steel mounting bolts.

59150
Black

JCS Lower to Upper Conversion Kit
Converts Grip-Mount stocks to Upper
This kit allows you to modify your existing grip-mount JCS stock to an upper position stock. It also includes at 0, 6, 8, and 10 degree angles. Improves mask clearance and makes sighting easier. Even if you don't use the sights, this kit brings the marker up higher allowing better sighting. Includes stainless steel mounting bolts. Fits all JCS gun mounts and RVA's in upper position. RVA's 66148, 66149, 66152, and all similar non-RVA gun mounts too!

59151
Black

JCS Rubber Shoulder PAD
for any JCS item #661xx
Comfortable rubber design. Unique look & feel. Works on your existing JCS folding stock.

66261
Black

Knob, Bolt, and E-Clip replacement KIT
for any JCS item #661xx
Genuine ORIGINAL by the inventor, Steve Wygant. This kit repairs any JCS Folding stock with slide assembly. Or, if you have a stock that is a several years old, you can buy this as an upgrade!

66133
Black

JCS Stock Grip Mount Kit
for Grip Mounting to Any Marker
Already own a JCS Folding Stock? This grip-mount part is the same as in our product 66190 Combat Stock. It will mount to Tippmann's, Spyder's, or Piranha's, and just about any other marker out there! A Stock is NOT included, just the bracket. Requires dis-assembly of the locking hinge. Use 5/32 Allen Wrench and 3/8 socket. Includes one bracket and mounting hardware.

66141
Black

JCS Stock Adapter Kit
for Spyder's and Piranha's
Already own a JCS Folding Stock? This adapter will mount JCS Folding Stocks to a Spyder or Piranha paintball markers. Mounts stock as shown in picture to the grip above your hand. The MP stock shown is discontinued. A Stock is NOT included, just the bracket and hardware to mount a stock to the gun. Includes one bracket and mounting hardware.

66151
Black

on stock

Stock Drop Block
for JCS Stocks and RVA's
This curved block and screws allows you to mount JCS stocks to the bottom of RVA's or drop your existing about 1 inch. Includes black saddle block and two 10-32 x 3/4 long SHCS. 5/32 Allen wrench required. Works with ANY UPPER-MOUNTED JCS folding stock: 66177, 66192, 66195. See pictures to left for use.

71364
Black Only

Combat Folding Stock KIT
for JCS RVA's and gun mounts only
 Already own a JCS RVA? This KIT mounts JCS gun mounts or RVA's which are attached to your marker in the upper position (will not work with grip mounted stocks). This product will not work alone. You get the stock, slide, hinge, and mounting hardware. Just use a 5/32 Allan wrench for installation!

66171

VooDoo Folding Stock KIT
for JCS RVA's and gun mounts only
 Already own a JCS RVA? This KIT mounts JCS gun mounts or RVA's which are attached to your marker in the upper position (will not work with grip mounted stocks). This product will not work alone. You get the stock, slide, hinge, and mounting hardware. Just use a 5/32 Allan wrench for installation!

66173

Pro 3 inch L 7/8 MIL-STD Rail - Aluminum
for MKX8™ markers
This is a direct replacement for the 3 inch composite receiver rail included with the MKX8. Precision machined from solid aluminum bar and black anodized. This rail will provide a solid professional mount for any higher end accessory. Included: 1 Aluminum Rail. All other hardware is included with the marker.

73218

JCS 6 inch Long 7/8 RIS Rail
MIL-STD-1913
This is the stand alone rail. It is the same rails as in kit 73245 and 73242. You get the rail ONLY and it WILL NOT MOUNT to your marker by itself. You must specify in the notes section if you want NON-anodized. Standard 73220 orders are Black anodized. The variety of holes are counter-sunk for 3mm x 0.5mm pitch Flat-Head machine screws. Machined from aircraft aluminum.

73220

JCS 3 inch Long 3/8 Dovetail Rail
Standard 3/8 Rail
This rail measures about 1/2 inch across the top of the 3/8 dovetail. This is the same dovetail dimensions as most paintball markers and competition air guns have. JCS Rails are machined from solid bar stock and designed for professionals... without the high price tag. Many competition air gun users have bought our rail kits. This part includes one 3 inch long rail. Drilled and counter bored holes are for M3 x 0.5mm flat head machine screw. Black anodized aircraft grade aluminum.

75414

JCS 6 inch Long 3/8 Dovetail Rail
Standard 3/8 Rail
This rail measures about 1/2 inch across the top of the 3/8 dovetail. This is the same dovetail dimensions as most paintball markers and competition air guns have. JCS Rails are machined from solid bar stock and designed for professionals... without the high price tag. Many competition air gun users have bought our rail kits. This part includes one 6 inch long rail. Drilled and counter bored holes are for M3 x 0.5mm flat head machine screw. Black anodized.

75418

JCS Offset Rail CLAMP Kit
fits 3/8 Dovetails
Used in JCS 732xx and JCS 754xx series rail products.
This handy little bar clamp secures to 3/8 dovetails of any paintball marker. Learn more about dovetails here. The holes are tapped for 3mm x 0.5mm pitch machine screws. Machined from aircraft aluminum. Includes bar, clamp, and stainless hardware. Qty One bar assembly per package.

73234
Black

JCS Offset Rail CLAMP Only
for 7/8 Dovetails
Used in 7/8 " JCS Rail Kit Accessory Mounting Rails
This offset clamp mounts to 7/8 MIL-STD rails. Gap on rail (that this clamp mounts to) must be 0.204 inch minimum width.

73228

JCS Round On-Center CLAMP Only
for 3/8 Dovetails
Used in JCS 732xx and 754xx series Accessory Mounting Rails
This handy little bar clamps securely to 3/8 dovetails of any paintball marker. Learn more about dovetails here. The holes are tapped for 3mm x 0.5mm pitch machine screws. Machined from aircraft aluminum. Includes Round Rail Mount, clamp, and stainless hardware. Qty One clamp assembly per package.

73235
Black

JCS 1/2 inch Hole shroud
for A-5 Flatline Barrels
Add more functionality to your A-5 Flatline with this shroud. Readily customize your Flatline barrel by mounting JCS 7/8 or 3/8 accessory rails. Features machined aluminum, black anodized, precisely CNC drilled and tapped rail mounting holes on all four side, includes stainless screws.

73210

JCS Duel Trigger for A-5 Springs Only
Replacement Springs
 This is a three pack of stainless steel springs used in the JCS Duel Trigger. Genuine JCS Replacement parts!

75707

JCS Double Trigger Guard
for JCS A-5 Duel Trigger
One black composite double trigger guard.

75704
Black

Our Mailing Address:

JCS Jet City Specialties®
65695 US HWY 33
Goshen, IN 46526
sales @ bp-usa . com
(574) 642-3153